Metal Wire Drawing Machine

1.25 yearsaa experience in drawing machine 2.ISO9001:2008, CQBC, etc. 3.Delivery in time 4.Long life time 5.High efficient

efficient easy operation straight line wire drawing machine

 -----------------------------------------------------------------------------------

1.Tuner roll control 2.Cooling system: Air-cooling, water-cooling 3.Pneumatic brake 4.Capstan material: ZG45 steel, build-up welded surface5.Wide range of technology

6.Fault display

7.Low noise

8.Human-machine dialogue

 ---------------------------------------------------------------------------------- 

Application

    It is applied for the production of prestressing strand, steel cord, bead wire, steel wire, spring steel wire, stainless steel wire, gas welding wire, arc welding wire,etc.

-----------------------------------------------------------------------------------

Specification

Items	Unit	LZ9-12/1200	LZ10/800	LZ9/700	LZ10/560	LZ10/400
Reel diameter	mm	900	800	700	560	400
Draw passage	time	9-12	10	9	10	10
Incoming dia	mm	Φ14-8	Φ10-8	Φ8-6.5	Φ6.5-5.5	Φ14-8
Outgoing dia	mm	Φ5-3	Φ4-3	Φ3-2.5	Φ2-1.8	Φ1-0.8
Wire darwing line	m/min	300	360	480	720	840
Incoming strength	Mpa	≤1300	≤1300	≤1300	≤1300	≤1300
Total compressibility	%	87.24-85.94	84-85.94	85.94-85.21	90.53-89.29	87.24-84
Average compressibility	%	20.48-19.58	18.42-19.58	19.58-19.13	21.00-20.02	18.61-16.74
Single motor power	Kw	110-90	90-55	75-55	37-22	15-7.5

 --------------------------------------------------------------------------------------

Successful experience / Markets

       Be up to the international level. Our lines and related complete equipment have been exported to Southeast Asia, West Asia, Eastern Europe, South America, the Middle East, Russia, India, Indonesia, Morocco, South Africa, Algeria, etc.

Classic Welcome! 

-------------------------------------------------------------------------------------- 

Whole wire drawing machine

  

      Our straight line wire drawing machine applies advanced international technology, with digestion and abosorption, the drawing machine is applicable for high intensity and performance demand. The capstan diameter of the series products is 350-1200mm with maximum inlet diameter of 14mm and minimum outlet diameter of 0.7mm.

    

        One drawing dies,  besides the finished rolls, all rolls about 8 ° tilt to keep the wire reel maximum amount of plot lines and wire straight toward. Tuning roller applying anti-pull the wire, to reduce mold drawing force.  

         The first five heads power by the AC frequency motor through high-frequency joint narrow V-belts, spread by the hardened reducer to capstan. And the other six heads power by the AC frequency motor through two high-frequency joint narrow V-belt to capstan.

         Die box is welded structure, into two cavity. The guide roller is mounted into the side to ensure that steel wire can straight into the drawing die, die holder should be adjusted to wire tangent to enter the drawing rolls tuning roller installed at the entry end of the mold base (2 # -11 # mode box) tuning roll by a small cylinder put power, tuning the swing of the roller, so that the corresponding sensor output signal to fine-tune the speed of change. Tuning roller wire tension by adjusting the air pressure change, regulation range 0.15-0.6Mpa. The mold box is also equipped with a stirring device. Tuning roller side of the mold box, a gear reducer single-phase capacitance running motor through a sprocket, power passed to the stirring arm to stir the mold box, lubrication powder, without agglomeration affect lubrication.

          The material is ZG45 steel, surface is build-up welded, the  surface is brightness, smooth, wear-resistant surfacing height of 150mm, long service life; hub height of 150-200mm.

Metal Wire Drawing Machine